Suffixes for Spherical Roller Bearings

Spherical roller bearings often have suffixes that provide additional information about the bearing's characteristics and properties. These suffixes help to identify the specific design and specifications of the bearing. Some common suffixes for spherical roller bearings are:

1. E: Indicates a bearing with a solid brass cage.

2. EM: Indicates a bearing with a solid brass cage, which is molded to the roller and spacer.

3. E1: Indicates a bearing with a solid brass cage and a larger internal radial clearance.

4. K: Indicates a bearing with a tapered bore, allowing for easier mounting on a shaft.

5. MB: Indicates a bearing with a solid brass cage that is machined to the center of the rollers.

6. J: Indicates a bearing with a solid brass cage that is machined to the outer ring.

7. EA: Indicates a bearing with a solid brass cage that is molded to the inner ring.

8. CA: Indicates a bearing with a solid brass cage that is molded to the center of the rollers and the inner ring.

These are just some examples of common suffixes for spherical roller bearings. The exact suffixes used can vary between manufacturers, and it's important to consult a bearing catalog or contact a bearing supplier for more information.

SKF Suffixes for Spherical Roller Bearings:

SKF uses various suffixes to identify the specifications and features of their spherical roller bearings. Here are some common SKF suffixes for spherical roller bearings:

1. CC: Indicates a bearing with a symmetrical rollers and a close cage.

2. E: Indicates a bearing with a solid brass cage.

3. CCJA/W33VA405: Indicates a bearing with a symmetrical rollers and a close cage for high speed applications, and a high capacity design.

4. CCJA/W33VA406: Indicates a bearing with a symmetrical rollers and a close cage for high speed applications, and a standard capacity design.

5. CC/W33: Indicates a bearing with a symmetrical rollers and a close cage for general applications.

6. CA/W33: Indicates a bearing with an asymmetrical rollers and a close cage for general applications.

7. MB: Indicates a bearing with a solid brass cage that is machined to the center of the rollers.

8. K: Indicates a bearing with a tapered bore, allowing for easier mounting on a shaft.

9. VA405: Indicates a bearing with a high capacity design.

10. VA406: Indicates a bearing with a standard capacity design.

These are just some examples of common suffixes used by SKF for their spherical roller bearings. The exact suffixes used can vary between specific bearings, and it's important to consult a bearing catalog or contact a SKF representative for more information.

 

FAG Suffixes for Spherical Roller Bearings:

FAG uses various suffixes to identify the specifications and features of their spherical roller bearings. Here are some common FAG suffixes for spherical roller bearings:

1. CC: Indicates a bearing with a symmetrical rollers and a close cage.

2. E1: Indicates a bearing with a solid brass cage and a larger internal radial clearance.

3. MB: Indicates a bearing with a solid brass cage that is machined to the center of the rollers.

4. K: Indicates a bearing with a tapered bore, allowing for easier mounting on a shaft.

5. J: Indicates a bearing with a solid brass cage that is machined to the outer ring.

6. C3: Indicates a bearing with a larger internal radial clearance, allowing for higher speeds and greater flexibility.

7. JPA: Indicates a bearing with a solid brass cage that is molded to the outer ring.

8. T41A: Indicates a bearing with a polyamide cage.

9. TVPB: Indicates a bearing with a glass fiber reinforced polyamide cage.

These are just some examples of common suffixes used by FAG for their spherical roller bearings. The exact suffixes used can vary between specific bearings, and it's important to consult a bearing catalog or contact a FAG representative for more information.

 

TIMKEN Suffixes for Spherical Roller Bearings:

Timken uses various suffixes to identify the specifications and features of their spherical roller bearings. Here are some common Timken suffixes for spherical roller bearings:

1. CC: Indicates a bearing with a symmetrical rollers and a close cage.

2. E: Indicates a bearing with a solid brass cage.

3. MB: Indicates a bearing with a solid brass cage that is machined to the center of the rollers.

4. K: Indicates a bearing with a tapered bore, allowing for easier mounting on a shaft.

5. J: Indicates a bearing with a solid brass cage that is machined to the outer ring.

6. C3: Indicates a bearing with a larger internal radial clearance, allowing for higher speeds and greater flexibility.

7. P: Indicates a bearing with a solid polyamide cage.

8. C: Indicates a bearing with a snap ring groove on the outer ring, allowing for easy installation and removal.

These are just some examples of common suffixes used by Timken for their spherical roller bearings. The exact suffixes used can vary between specific bearings, and it's important to consult a bearing catalog or contact a Timken representative for more information.

 

KOYO Suffixes for Spherical Roller Bearings:

Koyo uses various suffixes to identify the specifications and features of their spherical roller bearings. Here are some common Koyo suffixes for spherical roller bearings:

1. CC: Indicates a bearing with a symmetrical rollers and a close cage.

2. E: Indicates a bearing with a solid brass cage.

3. MB: Indicates a bearing with a solid brass cage that is machined to the center of the rollers.

4. K: Indicates a bearing with a tapered bore, allowing for easier mounting on a shaft.

5. J: Indicates a bearing with a solid brass cage that is machined to the outer ring.

6. C3: Indicates a bearing with a larger internal radial clearance, allowing for higher speeds and greater flexibility.

7. P: Indicates a bearing with a solid polyamide cage.

These are just some examples of common suffixes used by Koyo for their spherical roller bearings. The exact suffixes used can vary between specific bearings, and it's important to consult a bearing catalog or contact a Koyo representative for more information.

 

NTN Suffixes for Spherical Roller Bearings:

NTN uses various suffixes to identify the specifications and features of their spherical roller bearings. Here are some common NTN suffixes for spherical roller bearings:

1. CC: Indicates a bearing with a symmetrical rollers and a close cage.

2. E: Indicates a bearing with a solid brass cage.

3. MB: Indicates a bearing with a solid brass cage that is machined to the center of the rollers.

4. K: Indicates a bearing with a tapered bore, allowing for easier mounting on a shaft.

5. J: Indicates a bearing with a solid brass cage that is machined to the outer ring.

6. C3: Indicates a bearing with a larger internal radial clearance, allowing for higher speeds and greater flexibility.

7. P: Indicates a bearing with a solid polyamide cage.

These are just some examples of common suffixes used by NTN for their spherical roller bearings. The exact suffixes used can vary between specific bearings, and it's important to consult a bearing catalog or contact a NTN representative for more information.

 

NSK Suffixes for Spherical Roller Bearings:

NSK uses various suffixes to identify the specifications and features of their spherical roller bearings. Here are some common NSK suffixes for spherical roller bearings:

1. CA: Indicates a bearing with a symmetrical rollers and a close cage.

2. E: Indicates a bearing with a solid brass cage.

3. EM: Indicates a bearing with a solid brass cage that is machined to the center of the rollers.

4. K: Indicates a bearing with a tapered bore, allowing for easier mounting on a shaft.

5. K1: Indicates a bearing with a tapered bore and a tight internal clearance.

6. MB: Indicates a bearing with a solid brass cage that is machined to the outer ring.

7. C3: Indicates a bearing with a larger internal radial clearance, allowing for higher speeds and greater flexibility.

These are just some examples of common suffixes used by NSK for their spherical roller bearings. The exact suffixes used can vary between specific bearings, and it's important to consult a bearing catalog or contact a NSK representative for more information.

 

NACHI Suffixes for Spherical Roller Bearings:

NACHI uses various suffixes to identify the specifications and features of their spherical roller bearings. Here are some common NACHI suffixes for spherical roller bearings:

1. CA: Indicates a bearing with a symmetrical rollers and a close cage.

2. CAC: Indicates a bearing with a symmetrical rollers and a close cage that is made from a high-strength material.

3. CAE: Indicates a bearing with a symmetrical rollers and a close cage made from a high-strength material, with a solid brass cage.

4. C: Indicates a bearing with a solid brass cage.

5. E: Indicates a bearing with a solid brass cage that is machined to the center of the rollers.

6. MB: Indicates a bearing with a solid brass cage that is machined to the outer ring.

7. C3: Indicates a bearing with a larger internal radial clearance, allowing for higher speeds and greater flexibility.

These are just some examples of common suffixes used by NACHI for their spherical roller bearings. The exact suffixes used can vary between specific bearings, and it's important to consult a bearing catalog or contact a NACHI representative for more information.

 

Rexnord (Link-belt) Suffixes for Spherical Roller Bearings:

Rexnord (Link-Belt) uses various suffixes to identify the specifications and features of their spherical roller bearings. Here are some common Rexnord (Link-Belt) suffixes for spherical roller bearings:

1. C: Indicates a bearing with a solid brass cage.

2. CA: Indicates a bearing with a symmetrical rollers and a close cage.

3. CAE: Indicates a bearing with a symmetrical rollers and a close cage made from a high-strength material, with a solid brass cage.

4. E: Indicates a bearing with a solid brass cage that is machined to the center of the rollers.

5. MB: Indicates a bearing with a solid brass cage that is machined to the outer ring.

6. C3: Indicates a bearing with a larger internal radial clearance, allowing for higher speeds and greater flexibility.

These are just some examples of common suffixes used by Rexnord (Link-Belt) for their spherical roller bearings. The exact suffixes used can vary between specific bearings, and it's important to consult a bearing catalog or contact a Rexnord (Link-Belt) representative for more information.

 

Tsubaki Suffixes for Spherical Roller Bearings:

Tsubaki uses various suffixes to identify the specifications and features of their spherical roller bearings. Here are some common Tsubaki suffixes for spherical roller bearings:

1. C: Indicates a bearing with a solid brass cage.

2. CA: Indicates a bearing with a symmetrical rollers and a close cage.

3. E: Indicates a bearing with a solid brass cage that is machined to the center of the rollers.

4. MB: Indicates a bearing with a solid brass cage that is machined to the outer ring.

5. C3: Indicates a bearing with a larger internal radial clearance, allowing for higher speeds and greater flexibility.

These are just some examples of common suffixes used by Tsubaki for their spherical roller bearings. The exact suffixes used can vary between specific bearings, and it's important to consult a bearing catalog or contact a Tsubaki representative for more information.

 

Dodge Suffixes for Spherical Roller Bearings:

Dodge uses various suffixes to identify the specifications and features of their spherical roller bearings. Here are some common Dodge suffixes for spherical roller bearings:

1. E: Indicates a bearing with a machined brass cage that is located in the center of the rollers.

2. ER: Indicates a bearing with an extended inner ring on one side, allowing for easier installation.

3. MB: Indicates a bearing with a machined brass cage that is located on the outer ring.

4. MBL: Indicates a bearing with a machined brass cage that is located on the outer ring and has an extended inner ring on one side for easier installation.

5. C3: Indicates a bearing with a larger internal radial clearance, allowing for higher speeds and greater flexibility.

These are just some examples of common suffixes used by Dodge for their spherical roller bearings. The exact suffixes used can vary between specific bearings, and it's important to consult a bearing catalog or contact a Dodge representative for more information.

 

AST Suffixes for Spherical Roller Bearings:

AST uses various suffixes to identify the specifications and features of their spherical roller bearings. Here are some common AST suffixes for spherical roller bearings:

1. MB: Indicates a bearing with a machined brass cage.

2. C3: Indicates a bearing with a larger internal radial clearance, allowing for higher speeds and greater flexibility.

3. M: Indicates a bearing with a solid brass cage.

4. CA: Indicates a bearing with a symmetrical rollers and a close cage.

5. CAC: Indicates a bearing with a symmetrical rollers and a close cage made of a corrosion-resistant material.

These are just some examples of common suffixes used by AST for their spherical roller bearings. The exact suffixes used can vary between specific bearings, and it's important to consult a bearing catalog or contact an AST representative for more information.